Service area
Suburbs we visit
From South Yarra we clean vents in homes and apartments across the inner south-east and the city fringe.
- Prahran
- Toorak
- Windsor
- Richmond
- Cremorne
- Armadale
- Melbourne
- Southbank
- St Kilda
- Hawthorn
Lint that escapes the dryer filter collects in the vent duct, slowing drying and creating a potential fire hazard. We clear the full length of accessible dryer ducting and the outlet, which is especially important in apartments with long internal runs.
Every load of washing leaves behind lint, and while the dryer's own filter catches most of it, some always escapes into the vent duct. In a house with the dryer on an outside wall, that duct may be short. In many apartments, though, the dryer sits in a cupboard in the middle of the building and vents through a long run of flexible or rigid duct to a balcony, a riser or a façade outlet. Lint settles at every bend along the way.
We disconnect the dryer from its duct, check the connection hose and clean the full accessible length of ducting using brushes and extraction suited to lint, which is light and clumps easily. The outlet at the far end is cleaned and its flap checked so it opens freely and closes again when the dryer stops. Before reconnecting, we look for kinks or crushed sections in the hose behind the machine, a surprisingly common reason for slow drying when dryers are pushed back into tight laundry nooks.
Lint is flammable, and a blocked dryer duct holds it in a warm space, which is why this small job matters more than it looks. Clearing the vent also takes pressure off the dryer itself, so loads should dry in a more reasonable time. If your dryer is a condenser or heat pump model with no external vent, we will tell you, as there may be nothing to clean.
No. Vented dryers push moist air out through a duct, but condenser and heat pump dryers collect the moisture internally and have no external vent. If yours is one of those, a vent clean is not needed, though the internal lint filters and condenser still need regular cleaning as the manual describes.
Often we can clean it from both the dryer end and the outlet end, which covers most of the run. Where a duct joins a shared riser or passes through areas we cannot access, we clean what is reachable and let you know which section remains, in case building management needs to look at it.
Tell us a little about your system and we will come back to you with a free quote.
How it works
We note every vent, grille and exhaust in the home and the system behind each one, then confirm the scope and provide a free quote.
Vents are carefully taken down and laid out by room, and floors and furniture beneath each opening are covered before cleaning begins.
Ducts and fans behind each opening are cleaned under HEPA extraction, while the vents themselves are washed, detailed and dried.
Each vent goes back where it belongs, flush and secure. We run the system and exhaust fans to confirm everything moves air well.
Service area
From South Yarra we clean vents in homes and apartments across the inner south-east and the city fringe.
Tell us which vents are bothering you and we will send a free quote for your home or apartment.
